Description
OBD 2 Splitter Adapter Extension Cable with Launch Scanner CReader 3001 Male to Female Cable
Launch scanner CReader OBD2 Adapter Cable extender,obd2 extension cable, OBD2 Scanner, scanner compatible diagnostic tools of car. with a 16-pin socket. Universal for all cars with OBD2 Interface.
Product Description
Flat ribbon OBD2 extension cable with different colors of Male to Female designs. It is very novel and special, and it is more convenient to use. Protect the OBD II connectors of your car and device, and make the car’s OBD connector easy to access by using. 36cm long extension cable will not occupy the place and can achieve the effect of extension. The flat ribbon extension cable is made of high-quality material and craftsmanship, which is built to last and can be bent at will. Compatible with all kinds of OBD2 diagnostic tools with a 16-pin socket. Direct pass-through on all 16 Pins and supports all standard OBD2 protocols including CAN.
Launch CReader 3001:OBD2 Scanner: Car Code Reader: OBD II EOBD Car Fault Code Reader
- POWERFUL COMPATIBILITY: Support OBDII/EOBD/JOBD protocols, Works on MOST 1996 US-Based, 2000 EU-Based, and Asian cars, and newer OBD II & CAN domestic or import vehicles. It also Supports English, German, French, Spanish, Italian, Russian, and Portuguese. “PLUG AND PLAY”. It does not require any Battery or Charger. Just need to connect the diagnostic cable to the vehicle’s DLC socket. The Launch CR3001 can be powered and used.
- FULL FUNCTION: I/M: Readiness status test, View freeze frame date, LIVE DATA: View & Graph data stream, O2 Sensor, Evap system test, ON-Board monitor test, Read & Clear DTCs, Identify VIN information, Read DTCs, DTC code lookup, Turn off MIL(Malfunction Indicator Lights).
- TURN CHECK ENGINE LIGHT OFF: Quickly read and erase stored emission-related codes, and pending codes and show code definitions. Turns off the MIL (check engine light), helps in resetting the monitor before taking it to Smog, plus tells you what is going on before bringing the car in for repair, and saves you the trips to your mechanic.
- CLASSIC &PORTABLE DESIGN: built with a large LCD display (160*128 dpi), equipped with a 2.5 feet long cable, and made of a very thick flexible insulator. There are 4 buttons on CR3001. The Up and Down button is for scrolling the menu, and the “OK” and Exit buttons allow for entering the menu, and navigating back .portable size allows you to carry it around on your trip.
Power Full Functions Launch CReader 3001 :
Full OBDII/EOBD Diagnostic Function.
Read and Clear DTCs.
I/M Readiness Status.
Read Datastream.
O2 sensor Test.
Onboard Monitorized System Test.
Features:
1-Screen-1.77 “TFT ,160*128dpi
2-Voltage Range-9-18V DC
3-Operating Temperature- 0C -50C
4-Environment Temperature- -20C -70C
5-Dimension- 118mm*68mm*22.3mm
6-Weight-<200g
OBD2 Adapter cable Red and Yellow Extension Cable:
SAE J1962 defines the pinout of the connector as:
Splitter Male to female. That is your car telling you there is an issue. If you visit a mechanic, he will use an OBD2 scanner to diagnose the issue. To do so, he will connect the OBD2 reader to the OBD2 16-pin connector near the steering wheel.
Features of Obd2 Scanner Male to Female Car Scanner Extension Cable:
It is also a Brand new and high-quality OBD-II Male OBD extender, obd2 extension cable, and OBD-II Female Flat Cable.
It is also used for connecting your diagnostic interface moreover your vehicle with OBD-II compliant.
Length: About 30cm.
Weight: 350 gm.
OBD-II Plug: 16-pin male to the car.
It is also used for diagnostic Flat OBD-II Male -OBD-II Female Cable Diagnostic Cable Engine Company Vehicles.
Cable core: 16 Core.
OBD Connector Pinout Configuration.
| Pin Number | Pin Name | Description |
| 1,3,8,9,11,12,13 | Blank | These pins are not standard and are vendor-specific. It also not required for normal communication/interfacing |
| 2 | SAE J1850 Bus+ | This protocol uses Variable Pulse Width and is normally used by GM vehicles. It also Buses positive pin of the protocol. |
| 10 | SAE J1850 Bus- | This protocol uses Variable Pulse Width and is normally used by GM vehicles. It also Buses a negative pin of the protocol. |
| 4,5 | Ground | The ground of the complete system of the Car including the chassis |
| 6 | ISO15765-4 CAN High | It follows a 2-wire CAN protocol at 1Mbps speed. It also CAN high Pin. |
| 14 | ISO15765-4 CAN Low | It follows a 2-wire CAN protocol at 1Mbps speed. It also CAN low Pin. |
| 7 | ISO 9141 – K Line | It follows an asynchronous serial communication protocol. It also has Kline pin. |
| 8 | ISO 9141 – L Line | It follows an asynchronous serial communication protocol. It also has an L-line pin. |
Package Included 1 x OBD-II Male to OBD-II Female Flat Cable.
Tag: Obd connector cable OBD2 Male Connector cable Extension wire Cable
Tag: OBD2 Male Connector cable Extension Open Plug wire Cable
