OBD-II Male -OBD-II, High-quality materials give the cable superior flexibility & durability.
OBD-II Male to OBD-II Female Flat Cable:
SAE J1962 defines the pinout of the connector as:
That is your car telling you there is an issue. If you visit a mechanic, he will use an OBD2 scanner to diagnose the issue. To do so, he will connect the OBD2 reader to the OBD2 16 pin connector near the steering wheel.
Features of Obd2 Scanner Male to Female Car Scanner Extension Cable:
It is also a Brand new and high-quality OBD-II Male obd extender, obd2 extension cable, and OBD-II Female Flat Cable.
It is also used for connecting your diagnostic interface moreover your vehicle with OBD-II compliant.
Length: About 60 cm.
Weight: 282 gm.
OBD-II Plug: 16-pin male to the car.
It is also used for diagnostic Flat OBD-II Male -OBD-II Female Cable Diagnostic Cable Engine Company Vehicles.
Cable core: 16 Core.
OBD Connector Pinout Configuration.
|Pin Number||Pin Name||Description|
|1,3,8,9,11,12,13||Blank||These pins are not standard and are vendor-specific. It also not required for normal communication/interfacing|
|2||SAE J1850 Bus+||This protocol uses Variable Pulse Width and is normally used by GM vehicles. It also Buses positive pin of the protocol.|
|10||SAE J1850 Bus-||This protocol uses Variable Pulse Width and is normally used by GM vehicles. It also Buses a negative pin of the protocol.|
|4,5||Ground||The ground of the complete system of the Car including the chassis|
|6||ISO15765-4 CAN High||It follows a 2-wire CAN protocol at 1Mbps speed. It also CAN high Pin.|
|14||ISO15765-4 CAN Low||It follows a 2-wire CAN protocol at 1Mbps speed. It also CAN low Pin.|
|7||ISO 9141 – K Line||It follows an asynchronous serial communication protocol. It also has Kline pin.|
|8||ISO 9141 – L Line||It follows an asynchronous serial communication protocol. It also has an L-line pin.|
Package Included 1 x OBD-II Male to OBD-II Female Flat Cable.