Sale!

471

1) Colour-Black.
2) 16 Pin OBD-II Female Connector.
3)Great for DIY And Homemade Projects.
4)16 Pin female Connector.
5)Small & High-Quality Products.

Description

OBD2 Female Connector  Mapout24 OBDII:

obd connector OBD2 Female connector on a car obd connector (Female) pinout – Also has front view The OBDII 16 pin obd2 connector, diagnostic connector, obd2 scanner specification provides for a standardized hardware interface—the female 16-pin (2×8) J1962 connector. Unlike the OBDII connector, which was sometimes found under the hood of the vehicle, the obd2 scanner OBDII connector is required to be within 2 feet (0.61 m) of the steering wheel (unless an exemption is applied for by the manufacturer, in which case it is still somewhere within reach of the driver). SAE J1962 defines the pinout of the connector as:

 

OBD2 Female Connector PINOut: 

OBD2                                                                               

OBD2 Female Connector Pinout Configuration

Pin Number Pin Name Description
1,3,8,9,11,12,13 Blank These pins are not standard and are vendor-specific. It is also not required for normal communication/interfacing
2 SAE J1850 Bus+ This protocol also uses Variable Pulse Width and is normally used by GM vehicles. This is the Bus positive pin of the protocol.
10 SAE J1850 Bus- This protocol also uses Variable Pulse Width and is normally used by GM vehicles. This is the Bus negative pin of the protocol.
4,5 Ground The ground of complete system also has the Car including chassis
6 ISO15765-4 CAN High It follows a 2-wire CAN protocol at 1Mbps speed. It also has the CAN high Pin
14 ISO15765-4 CAN Low It follows a 2-wire CAN protocol at 1Mbps speed. It also has the CAN low Pin
7 ISO 9141 – K Line It follows asynchronous serial communication protocol, tIt also has the Kline Pin
8 ISO 9141 – L Line It follows asynchronous serial communication protocol, It also has the L line Pin

 

Universal OBD2 Connectors
What Is Universal OBD(Universal OBD2 Female Connector ):

It is also an improvement over OBD-II in both capability and standardization. The OBD Female Connector standard specifies the type of diagnostic connector and its pinout, the electrical signaling protocols available.  It also the messaging format. It also provides a candidate list of vehicle parameters to monitor along with how to encode the data for each. There is a pin in the connector that provides power for the scan tool from the vehicle battery, which moreover eliminates the need to connect a scan tool to a power source separately.

 

Tag: Ashok Leyland Scantool Cable OBD2 Scan Tool Cable Diagnostic Tool BS6 Scantool Cable

Tag: Tag : cummins inline7 engine data link adapter Cable OBD to Db26

TAg: Obd connector cable OBD2 Male Connector cable Extension wire Cable

Tag: OBD2 Male Connector cable Extension Open Plug wire Cable

Tag: obd2 scan tool Cable Ashok Leyland Scantool Diagnostic Tool cable

 

You may also like…