Sale!
(3 customer reviews)

511

Features:

  • Color: Black
  • 16 Pin OBDII J1962F Male Connector kit.
  • Includes Hardware
  • High quality construction and materials
LIMITED OFFER!

Description

OBD-II Connector Male 16 PIN Universal Adaptor OBD2 Connector OBDii

This is a universal OBD-II Male connector 16 PIN, obd2 male connector diagnostic connector, It also has Colour in black of Ultra -version.

The obd2 male connector diagnostic connector, also has a 4, 5 for ground connections and a 16 pin obd2 connector in the obd2 scanner for a 12V power supply from the vehicle battery. Prior to OBD, It also has auto manufacturers that did not standardize DTCs (diagnostic trouble code). OBD-I begins standardized DTCs. OBD-II added specific tests to determine the vehicle’s emission performance OBD-II adds more features and is in the regulatory development phase. Moreover  Many old cars do not have 16 pin connectors.

 

Universal obd2 male diagnostic connector :

Also, have the Female OBD-II connector on a car Female OBDII Male Connector 16 PIN pinout – front view The OBD-II specification provides for a standardized hardware interface—the female 16-pin (2×8) J1962 connector. Unlike the OBD-I connector, which was sometimes found under the hood of the vehicle, the OBD-II Male Connector 16 PIN  connector is required to be within 2 feet (0.61 m) of the steering wheel (unless an exemption is applied for by the manufacturer, in which case it is still somewhere within reach of the driver). SAE J1962 defines the pinout of the connector as:

OBD2

Universal obd2 male connector obd2 scanner 16 PIN Pinout Configuration

Pin Number Pin Name Description
1,3,8,9,11,12,13 Blank These pins are not standard and are vendor-specific. It is also not required for normal communication/interfacing
2 SAE J1850 Bus+ This protocol uses Variable Pulse Width and is normally also used by GM vehicles. This is the Bus positive pin of the protocol.
10 SAE J1850 Bus- This protocol also uses Variable Pulse Width and is normally also used by GM vehicles. This is the Bus negative pin of the protocol.
4,5 Ground The ground of complete system of the Car also including chassis
6 ISO15765-4 CAN High It follows a 2-wire CAN protocol at 1Mbps speed. It also has CAN high Pin Male Connector 16 PIN
14 ISO15765-4 CAN Low It follows a 2-wire CAN protocol at 1Mbps speed. It also has CAN low Pin
7 ISO 9141 – K Line It follows asynchronous serial communication protocol, It also has Kline Pin
8 ISO 9141 – L Line It follows asynchronous serial communication protocol, It also has L line Pin

3 reviews for OBD Connector j1962 16 pin obd2 male connector diagnostic connector

  1. rupdeshmukh1 (verified owner)

    Good in quality, on time delivery.

  2. sarangapatil2 (verified owner)

    Perfect as described …I am very happy.

  3. kolhepraveen2 (verified owner)

    Used this for 2 months and works well.

Only logged in customers who have purchased this product may leave a review.